วิธีการใส่แรม Dell PowerEdge M915

Pravit

MemoryToday.com ผู้ให้บริการ "เพิ่มแรม" และผู้จำหน่าย "SSD" อันดับ 1 ของประเทศไทย !!
สอบถามราคา และ การบริการ โทร. 02-641-0055

Dell PowerEdge M915

System Memory
The system board has 32 memory sockets organized in four channels per processor with two LV DIMMs per channel. This configuration permits the following maximum memory configurations:

1 GB, 2 GB, 4 GB, 8 GB, and 16 GB LV DIMMs are supported per channel, for a total of up to 512 GB. Single-rank, dual rank, and quad-rank RDIMMs are supported.

General Memory Module Installation Guidelines – PowerEdge M915
To ensure optimal performance of your system, observe the following guidelines when configuring your system memory:

CAUTION: Memory module blanks must be installed in unoccupied memory sockets to maintain proper cooling airflow.
• Memory modules must be installed in pairs, beginning with the first two
sockets in each set of memory modules. These sockets are marked by white
retention levers.
• The memory configuration for each processor must be identical.
• Memory modules must be identical in size, speed, and technology in lock–step pair (same colored levers).
• If quad-rank memory modules are mixed with single- or dual-rank modules, the quad-rank modules must be installed in the sockets with the white release levers.
• If pairs of memory modules of different sizes are installed, the larger capacity memory modules must be installed in the lower numbered slots.
• Memory sparing is supported in a four-processor system only if 32 memory modules are installed.
• Memory sparing is supported in a two-processor system only if 16 memory modules are installed.