วิธีการใส่แรม Dell PowerEdge R210

TIM

MemoryToday.com ผู้ให้บริการ "เพิ่มแรม" และผู้จำหน่าย "SSD" อันดับ 1 ของประเทศไทย !!
สอบถามราคา และ การบริการ โทร. 02-641-0055

Dell PowerEdge R210

System Memory

Your system supports single and dual-rank DDR3 unbuffered ECC DIMMs (UDIMMs). DIMMs can be 1066 or 1333 MHz.
The system contains four memory sockets. Each two-socket set is organized into two channels. The first socket of each channel is marked with white release
levers.

General Memory Module Installation Guidelines

To ensure optimal performance of your system, observe the following general guidelines when configuring your system memory.
* Except for memory channels that are unused, all populated memory channels must have identical configurations.

*Memory modules of different sizes can be mixed in sockets 1 to 4 (for example, 2 GB and 4 GB), but all populated channels must have identical configurations.
*Memory modules are installed in the numeric order of the sockets beginning with 1 to 4.
*One or two DIMMs per channel can support up to 1333 Mhz.
*If memory modules with different speeds are installed, they will operate at the speed of the slowest installed memory module(s).

Mode-Specific Guidelines

Your system supports both single channel and dual channel modes. A minimal single-channel configuration of one 1 GB memory module per processor is also supported in this mode.

Table 3-1 shows sample memory configurations that follow the appropriate memory guidelines stated in this section. The samples show identical memory- module configurations and their the physical and available memory totals. The table does not show mixed or quad-rank memory-module configurations, nor
does it address the memory speed considerations of any configuration.