HP Memory Configuration 07

Server

MemoryToday.com ผู้จำหน่าย RAM, SSD, HDD & Upgrade Parts สำหรับ Server อันดับ 1 ของประเทศไทย !!
สอบถามข้อมูลเพิ่มเติมได้ที่ 02-641-0055 Line: @memorytoday

HP Memory Configuration 07

ProLiant DL585
Standard Memory : 2/4GB (R)
Maximum Memory : 128GB
Slots : 32 (16 banks of 2)
CPU : AMD Opteron 8000 Series
Comments : *Advanced ECC.
*8 sockets (4 banks of 2) per memory board.
*32 sockets (16 banks of 2) using four memory boards.
*32GB at 400MHz (PC3200), 96GB at 333MHz (PC2700),
or 128GB at 266MHz (PC2100 or PC2700).

ProLiant DL585 G2
Standard Memory : 2GB (R)
Maximum Memory : 64GB
Slots : 32 (16 Banks of 2)
CPU : AMD Opteron 2000 series
Chipsets : Nvidia nForce 2200 Professional
Comments : *8 memory Slots per processor.
*Each CPU node yields 2-way bank interleaving when install 4 single ranked DIMMs.
*Each CPU node yields 4-way bank interleaving when install 4 dual ranked DIMMs.
*Mixing single and dual ranked DIMMs on the same CPU node will disable bank interleaving.
*Kits must be installed in decreasing capacity with the largest kits installed farest away from each CPU.

ProLiant DL585 G5
Standard Memory : 2GB (R)
Maximum Memory : 256GB
Slots : 32
CPU : AMD Opteron
Chipsets : Nvidia nForce 2200 Professional
Comments : Per HP, only models with the Opteron (Third Generation) processor, models 8378, 8382, and 8384 support DDR2-800 memory.
Each CPU node yields 2-way bank interleaving when install 4 single ranked DIMMs
Each CPU node yields 4-way bank interleaving when install 4 dual ranked DIMMs
Mixing single and dual ranked DIMMs on the same CPU node will disable bank interleaving.
Kits must be installed in decreasing capacity with the largest kits installed furthest away from each CPU
Per HP, if all four Banks on a memory node are populated, the max. memory clock speed will be 533MHz. If two or fewer Banks on a node are populated, the max. speed will be 667MHz.

ProLiant DL585 G6
Standard Memory : 16 GB (Removable)
Maximum Memory : 256GB
Slots : 8 Sockets (4 Banks of 2) per processor
CPU : AMD Opteron
Chipsets : Nvidia nForce 2200 Professional

ProLiant DL585 G7
Standard Memory : 32/64GB R
Maximum Memory : 512 GB with four processors
Slots : 12 Sockets (3 Banks of 4) per processor
CPU : AMD Opteron
Chipsets : AMD SR5690
Comments : Due to AMD Opteron 6200/6100 CPU limitations, only 6200 series can support 8GB and above RDIMMs and LR DIMM. Please check which AMD Opteron model is used on your server before you buy the memory or you can contact us.

ProLiant DL60 Gen9 (G9)
Standard Memory : 8GB(Removable)
Maximum Memory : 128GB Reg ECC RDIMMs;256GB LRDIMMs with release of 32GB module;
Slots : 4 Socket(s) per CPU;8 Socket(s) using two CPUs;
CPU : Intel Xeon / Intel C610 Series 0;
Bus Architecture : PCI Express; SSD - SATA 3.5-inch; USB;
Comments : *For HP Gen8 and Gen9 server series, the system shows a warning message like "DIMM could not be authenticated as genuine HPE Memory. Enhanced and extended HP SmartMemory features will not be active." if non-genuine HPE Memory modules are used.
*If you skip this information, the module still can be work well, but some enhanced and extended HP functions are not verified as having full performance as genuine HPE Memory.

ProLiant DL785 G5
Standard Memory : 8GB (R)
Maximum Memory : 512GB
Slots : 64(Total), 8(4 banks of 2) per processor memory node
CPU : AMD Opteron
Comments : *Four single ranked DIMMs per processor node yields 2-way bank interleaving.
*Four dual ranked DIMMs per processor node yields 4-way bank interleaving.
*Mixing single and dual ranked DIMMs on the same processor node will disable bank interleaving.
*Kits must be installed in decreasing capacity with the largest kits installed in the Banks furthest away from each processor.
*Per HP, if all four Banks on a memory node are populated, the maximum memory clock speed will be 533MHz.
* If two or fewer Banks on a node are populated, the maximum memory clock speed will be 667MHz.

ProLiant DL785 g6
Standard Memory : 8/16/32/64GB R
Maximum Memory : 512GB
Slots : 8 Sockets (4 Banks of 2) per processor memory node
CPU : AMD Opteron
Chipsets : ServerWorks HT2100

ProLiant DL80 Gen9 (G9)
Standard Memory : 8GB(Removable)
Maximum Memory : 128GB Reg ECC RDIMMs;256GB LRDIMMs with release of 32GB module;
Slots : 4 Socket(s) per CPU;8 Socket(s) using two CPUs;
CPU : Intel Xeon / Intel C610 Series 0;
Bus Architecture : PCI Express; SSD - SATA 3.5-inch; USB;
Comments : *For HP Gen8 and Gen9 server series, the system shows a warning message like "DIMM could not be authenticated as genuine HPE Memory. Enhanced and extended HP SmartMemory features will not be active." if non-genuine HPE Memory modules are used.
*If you skip this information, the module still can be work well, but some enhanced and extended HP functions are not verified as having full performance as genuine HPE Memory.

ProLiant DL980 G7
Standard Memory : 128 GB (Removable) or 256 GB (Removable)
Maximum Memory : 2 TB with 8 Processors
Slots : 16 Sockets (4 Banks of 4) per Processor
CPU : Intel Xeon
Chipsets : Intel 7500
Comments : To choose memory depends on which CPU and scalable memory buffer you have. Please check which CPU, chipset on your server before you buy the memory.

ProLiant m510 Server Cartridge
Standard Memory : 8 GB (Removable)
Maximum Memory : 128 GB Reg ECC RDIMMs
Slots : 4 Socket(s)
Bus Architecture : SSD - M.2 NVM
Comments : Memory will clock down to run at optimal speeds depending on processor model and number of modules installed. See latest ProLiant QuickSpecs for processor models and supported memory speeds. This system supports Registered ECC (RDIMM) or Load Reduced (LRDIMM) memory. Mixing RDIMM and LRDIMM is not supported within this system. If only one processor is installed, only 4 DIMM slots are available. When populating with two processors 8 DIMM slots are available

ProLiant MicroServer G7 N54L
Standard Memory : 2/4 GB (Removable)
Maximum Memory : 8 GB ECC UDIMMs
Slots : 2 Sockets

ProLiant MicroServer Gen8 G1610T
Standard Memory : 2 GB (Removable)
Maximum Memory : 16 GB ECC UDIMMs
Slots : 2 Sockets
CPU : Intel Celeron
Comments : To choose RDIMM or ECC UDIMM depends on which CPU and memory type you have. Please check which CPU and memory you have before you buy the memory.
Do not use TS1GLK72V3/6H and TS1GKR72V3/6H with Elpida chip on Intel Romley platform.
*For HP Gen8 and Gen9 server series, the system shows a warning message like "DIMM could not be authenticated as genuine HPE Memory. Enhanced and extended HP SmartMemory features will not be active." if non-genuine HPE Memory modules are used.
*If you skip this information, the module still can be work well, but some enhanced and extended HP functions are not verified as having full performance as genuine HPE Memory.

ProLiant MicroServer Gen8 G2020T
Standard Memory : 2 GB (Removable)
Maximum Memory : 16 GB ECC UDIMMs
Slots : 2 Sockets
CPU : Intel Pentium
Comments : To choose RDIMM or ECC UDIMM depends on which CPU and memory type you have. Please check which CPU and memory you have before you buy the memory.
Do not use TS1GLK72V3/6H and TS1GKR72V3/6H with Elpida chip on Intel Romley platform.

ProLiant MicroServer N36L
Standard Memory : 2/4 GB (Removable)
Maximum Memory : 8 GB ECC UDIMMs
Slots : 2 Sockets
CPU : AMD Athlon II
Comments : To choose RDIMM or ECC UDIMM depends on which CPU and memory type you have. Please check which CPU and memory you have before you buy the memory.
Do not use TS1GLK72V3/6H and TS1GKR72V3/6H with Elpida chip on Intel Romley platform.

ProLiant MicroServer N40L
Standard Memory : 2/4 GB (Removable)
Maximum Memory : 8 GB ECC UDIMMs
Slots : 2 Sockets
CPU : AMD Athlon Neo; AMD Turion
Comments : To choose RDIMM or ECC UDIMM depends on which CPU and memory type you have. Please check which CPU and memory you have before you buy the memory.
Do not use TS1GLK72V3/6H and TS1GKR72V3/6H with Elpida chip on Intel Romley platform.

ProLiant ML10 Gen9 (G9)
Standard Memory : 8 GB (Removable) or 16 GB (Removable)
Maximum Memory : 64 GB
Slots : 4 Socket(s)
CPU : Intel Pentium Dual Core G4400 Intel C236 Intel Xeon E3-1225 v5 Intel C236
Bus Architecture : PCI Express; SSD - SATA 2.5-inch 9.5mm; SSD - SATA
Chipsets : Intel Pentium Dual Core G4400 Intel C236 Intel Xeon E3-1225 v5 Intel C236
Comments : MODULES MUST BE ORDERED AND INSTALLED IN PAIRS for Dual Channel mode.

ProLiant ML110 G2
Standard Memory : 256MB (R)
Maximum Memory : 4GB
Slots : 4

ProLiant ML110 G3
Standard Memory : 512M/1GB (R)
Maximum Memory : 8GB
Slots : 4 (2 banks of 2)
Chipsets : Intel E7230
Comments : *A 64-bit Operating System is required to address more than 4GB memory.

ProLiant ML110 G4
Standard Memory : 512MB/1GB (R)
Maximum Memory : 8GB
Slots : 4 (2 Banks of 2)

ProLiant ML110 G5
Standard Memory : 512MB/1GB (R)
Maximum Memory : 8GB
Slots : 4
Chipsets : Intel 3200
Comments : *MODULES MAY BE INSTALLED ONE AT A TIME; however, they must be added in like pairs to take advantage of memory interleaving.
*Slots 1 and 3 are interleaving pair. Slots 2 and 4 are interleaving pair.

ProLiant ML110 G7
Standard Memory : 2/4 GB (Removable)
Maximum Memory : 16 GB
Slots : 4 Sockets

ProLiant ML110 Gen9 (G9)
Standard Memory : 8 GB (Removable)
Maximum Memory : 256 GB RDIMMs
Slots : 8 Socket(s)
CPU : Intel Xeon Intel C610 Series
Bus Architecture : PCI Express; SSD - SATA 2.5-inch 9.5mm; SSD - SATA
Chipsets : Intel Xeon Intel C610 Series
Comments : Memory will clock down to run at optimal speeds depending on processor model and number of modules installed.
*For HP Gen8 and Gen9 server series, the system shows a warning message like "DIMM could not be authenticated as genuine HPE Memory. Enhanced and extended HP SmartMemory features will not be active." if non-genuine HPE Memory modules are used.
*If you skip this information, the module still can be work well, but some enhanced and extended HP functions are not verified as having full performance as genuine HPE Memory.

ProLiant ML115
Standard Memory : 512MB/1GB (R)
Maximum Memory : 8GB
Slots : 4 (2 Banks of 2)

ProLiant ML115 g5
Standard Memory : 512 MB (Removable) or 1 GB (Removable)
Maximum Memory : 8GB
Slots : 4
CPU : AMD Athlon 64; AMD Opteron
Chipsets : Nvidia nForce Pro 3400