วิธีการใส่แรม Dell PowerEdge R300

Pravit

MemoryToday.com ผู้ให้บริการ "เพิ่มแรม" และผู้จำหน่าย "SSD" อันดับ 1 ของประเทศไทย !!
สอบถามราคา และ การบริการ โทร. 02-641-0055

Dell PowerEdge R300

System Memory
The six memory module sockets are located to the right side of the system board and can accommodate 512 MB to 24 GB of registered PC-4200/5300, 533/667-MHz, DDR2 memory with ECC. See Figure 6-1 for the location of the memory module sockets.

You can upgrade the system memory by installing combinations of 512-MB, 1-GB, 2-GB, and 4-GB memory modules. You can purchase memory upgrade kits from Dell.

NOTE: The memory modules must be PC-4200/5300 compliant.

Memory Module Installation Guidelines
The memory module sockets are arranged in six ranks (1, 2, 3, 4, 5, and 6) on two channels (A and B).
The memory modules ranks are identified as follows:
Rank 1, 2: DIMM1_A and DIMM1_B
Rank 3, 4: DIMM2_A and DIMM2_B
Rank 5, 6: DIMM3_A and DIMM3_B

The memory modules must be installed in identical pairs in configurations that have more than one memory module. For example, if socket DIMM1_A contains a 512-MB memory module, then the second memory module to be installed must be a 512-MB memory module in socket DIMM1_B.

Table 3-1 shows examples of different memory configurations, based on the following guidelines:
• The minimum memory configuration is 512 MB.
• If only one memory module is installed, it must be installed in the DIMM1_A socket.
• A rank must contain identical memory modules.
• Install memory modules in rank 1, 2(DIMM1_x) before installing memory modules in rank 3, 4 (DIMM2_x), and install memory modules in rank 3, 4 before installing rank 5, 6 (DIMM3_x).
• Configurations of three or five memory modules are not supported.