DELL Memory Configuration 01

Server

MemoryToday.com ผู้จำหน่าย RAM, SSD, HDD & Upgrade Parts สำหรับ Server อันดับ 1 ของประเทศไทย !!
สอบถามข้อมูลเพิ่มเติมได้ที่ 02-641-0055 Line: @memorytoday

DELL Memory Configuration 01

Inspiron 20 (3059)
Standard Memory : 4 GB (Removable) or 6 GB (Removable)
Maximum Memory : 8 GB
Slots : 2 Socket(s)
CPU : Intel Core i3 (N/A) Intel Core i5 (N/A)
Bus Architecture : Flash - MMC; Flash - SDXC; PCI Express; SSD
Expansion : 4GB Standard
Comments : MODULES MUST BE ORDERED AND INSTALLED IN PAIRS for Dual Channel mode.

DSS 1500
Standard Memory : 16 GB (Removable)
Maximum Memory : 512 GB
Slots : 8 Socket(s) per CPU 16 Socket(s) using two CPUs
CPU : Intel Xeon Intel C610 Series
Bus Architecture : PCI Express; SSD - SATA 2.5-inch 9.5mm; SSD - SATA
Chipsets : Intel Xeon Intel C610 Series
Comments : Memory will clock down to run at optimal speeds depending on processor model and number of modules installed. If only one processor is installed, only 8 DIMM sockets can be populated. With two processors, all 16 DIMM sockets can be populated.

DSS 1510
Standard Memory : 8 GB (Removable)
Maximum Memory : 256 GB
Slots : 8 Socket(s)
CPU : Intel Xeon E5-2600 v3 Intel C610 Series
Bus Architecture : PCI Express; SSD - SATA 2.5-inch 9.5mm; SSD - SATA
Chipsets : Intel Xeon E5-2600 v3 Intel C610 Series
Comments : Memory will clock down to run at optimal speeds depending on processor model and number of modules installed. If only one processor is installed, only 8 DIMM sockets can be populated. With two processors, all 16 DIMM sockets can be populated.

DSS 2500
Standard Memory : 16 GB (Removable)
Maximum Memory : 512 GB
Slots : 8 Socket(s) per CPU 16 Socket(s) using two CPUs
CPU : Intel Xeon Intel C610 Series
Bus Architecture : PCI Express; SSD - SATA 2.5-inch 9.5mm; SSD - SATA
Chipsets : Intel Xeon Intel C610 Series
Comments : Memory will clock down to run at optimal speeds depending on processor model and number of modules installed. If only one processor is installed, only 8 DIMM sockets can be populated. With two processors, all 16 DIMM sockets can be populated.

NSW1U ip network server(Dell)
Standard Memory : 0 GB (R)
Maximum Memory : 24GB
Slots : 6

PowerEdge 1400
Standard Memory : 128MB(R)
Maximum Memory : 2GB
Slots : 4

PowerEdge 1400SC
Standard Memory : 128MB(R)
Maximum Memory : 2GB
Slots : 4

PowerEdge 1420SC
Standard Memory : 256MB(R)
Maximum Memory : 12GB
Slots : 6(3 banks of 2)
Comments : *Chipset:Intel E7520(Lindenhurst)
*If only one memory module is installed, it must be installed in socket DIMM1.
*If single-ranked and double ranked modules are installed at the same time, the dual-ranked memory modules must be installed in bank1.
*Dual-ranked memory modules are not supported in bank3.
*If bank2 contains dual-ranked memory modules, bank3 must remain unpopulated.
*System supports 8 ranks maximum.

PowerEdge 1425SC
Standard Memory : 256MB(R)
Maximum Memory : 12GB
Slots : 6(3 banks of 2)
Comments : *Chipset:Intel E7520(Lindenhurst)
*If only one memory module is installed, it must be installed in socket DIMM1.
*If single-ranked and double ranked modules are installed at the same time, the dual-ranked memory modules must be installed in bank1.
*Dual-ranked memory modules are not supported in bank3.
*If bank2 contains dual-ranked memory modules, bank3 must remain unpopulated.
*System supports 8 ranks maximum.

PowerEdge 1800
Standard Memory : 256MB(R)
Maximum Memory : 12GB
Slots : 6 (3 banks of 2)
Expansion : 6 Sockets (3 Banks of 2)
Comments : *Chipset:Intel E7520 (Lindenhurst)
*If only one memory module is installed,it must be installed in socket DIMM1_A or DIMM1B.
*If you install both single-ranked and dual-ranked memory modules, the dual-ranked memory modules must be installed in bank 1
*Dual-ranked memory modules are not supported in bank 3.
*If bank 2 contains dual-ranked memory modules, then bank 3 must be unpopulated
*System supports 8 ranks maximum.

PowerEdge 1850
Standard Memory : 256MB(R)
Maximum Memory : 16GB
Slots : 6 (3 banks of 2)
Expansion : 6 Sockets (3 Banks of 2)
Comments : *Chipset:Intel E7520 (Lindenhurst)
*If only one memory module is installed,it must be installed in socket DIMM1_A or DIMM1B.
*If you install both single-ranked and dual-ranked memory modules, the dual-ranked memory modules must be installed in bank 1
*Dual-ranked memory modules are not supported in bank 3.
*If bank 2 contains dual-ranked memory modules, then bank 3 must be unpopulated
*System supports 8 ranks maximum.

PowerEdge 1855
Standard Memory : 256MB(R)
Maximum Memory : 16GB
Slots : 6 (3 banks of 2)
Expansion : 6 Sockets (3 Banks of 2)
Comments : *Chipset:Intel E7520 (Lindenhurst)
*If only one memory module is installed,it must be installed in socket DIMM1_A or DIMM1B.
*If you install both single-ranked and dual-ranked memory modules, the dual-ranked memory modules must be installed in bank 1
*Dual-ranked memory modules are not supported in bank 3.
*If bank 2 contains dual-ranked memory modules, then bank 3 must be unpopulated
*System supports 8 ranks maximum.

PowerEdge 1900
Standard Memory : 1/2GB (R)
Maximum Memory : 32GB
Slots : 8
Expansion : 8 Sockets
Comments : Chipset: Intel 5000P

PowerEdge 1950
Standard Memory : 1/2GB (R)
Maximum Memory : 32GB
Slots : 8 (4 Banks of 2)
Expansion : 8 Sockets
Comments : Chipset:Intel 5000X

PowerEdge 1950 III
Standard Memory : 1GB R
Maximum Memory : 32GB
Slots : 8 (4 banks of 2)
Expansion : 8 Sockets

PowerEdge 1955
Standard Memory : 1/2GB R
Maximum Memory : 32GB
Slots : 8 (4 banks of 2)
Expansion : 8 Sockets using 2 CPUs

PowerEdge 2800
Standard Memory : 256MB(R)
Maximum Memory : 16GB
Slots : 6 (3 banks of 2)
Expansion : 6 Sockets (3 Banks of 2)
Comments : *Chipset:Intel E7520 (Lindenhurst)
*If only one memory module is installed,it must be installed in socket DIMM1_A or DIMM1B.
*If you install both single-ranked and dual-ranked memory modules, the dual-ranked memory modules must be installed in bank 1
*Dual-ranked memory modules are not supported in bank 3.
*If bank 2 contains dual-ranked memory modules, then bank 3 must be unpopulated
*System supports 8 ranks maximum.

PowerEdge 2850
Standard Memory : 256MB(R)
Maximum Memory : 16GB
Slots : 6 (3 banks of 2)
Expansion : 6 Sockets (3 Banks of 2)
Comments : *Chipset:Intel E7520 (Lindenhurst)
*If only one memory module is installed,it must be installed in socket DIMM1_A or DIMM1B.
*If you install both single-ranked and dual-ranked memory modules, the dual-ranked memory modules must be installed in bank 1
*Dual-ranked memory modules are not supported in bank 3.
*If bank 2 contains dual-ranked memory modules, then bank 3 must be unpopulated
*System supports 8 ranks maximum.

PowerEdge 2900
Standard Memory : 1/2/4GB (R)
Maximum Memory : 48GB
Slots : 12
Expansion : 12 Sockets (6 Banks of 2)

PowerEdge 2900 III
Standard Memory : 1/2/4GB R
Maximum Memory : 48GB
Slots : 12 (6 banks of 2)
Expansion : 12 Sockets (6 Banks of 2)

PowerEdge 2950
Standard Memory : 1/2/4GB (R)
Maximum Memory : 32GB
Slots : 8
Expansion : 8 Sockets (4 Banks of 2)
Comments : Chip:Intel 5000P

PowerEdge 2950 III
Standard Memory : 1GB R
Maximum Memory : 32GB
Slots : 8 (4 banks of 2)
Expansion : 8 Sockets

PowerEdge 2970
Standard Memory : 1GB removable
Maximum Memory : 64GB
Slots : 8
Expansion : 8 Sockets Total ;4 Sockets (2 Banks of 2) per Processor

PowerEdge 400SC
Standard Memory : 256MB(R)
Maximum Memory : 4GB
Slots : 4 (2 banks of 2)
Expansion : 4 Sockets (2 Banks of 2)

PowerEdge 6800
Standard Memory : 1GB R
Maximum Memory : 64GB
Slots : 16
Expansion : 16 Sockets